Mill Upgrades & Capital Investments
New mills, mill upgrades and other projects requiring an expenditure of capital.
Latest News
As Power Prices Rise and Steel Prices Fall, ArcelorMittal Considers Future of South African Mill
04 February 2016 - ArcelorMittal’s South African division said it expects to record a headline loss of 1,250 cents per share in 2015 and is rethinking its investment in its ultrathin hot rolled coil mill along the country’s west coast.
Mexican Steelmaker Orders Acid-Free "Pickling" Line
28 January 2016 - Mexico’s Talleres y Aceros has ordered an Eco Pickled Surface (EPS) descaling line to round out operations at its new mini-mill in the state of Veracruz.
Midrex, Primetals Win Contract for Proposed Merchant HBI Plant
28 January 2016 - International Metallics Corp. (Canada) Ltd. has selected Midrex Technologies Inc. and partner Primetals Technologies to outfit a proposed hot briquetted iron plant in the Canadian province of Quebec.
SMS group Installs New Welding Line at Russian Pipe Works
27 January 2016 - Russia’s Gazpromtrubinvest has commissioned a 16-inch, high-frequency pipe-welding line at its Volgorechensk pipe works, according to the supplier on the project.
Steel Dynamics, Mississippi Officials Mark Start of Plant Expansion
25 January 2016 - U.S.-based Steel Dynamics Inc. (SDI) has broken ground on the company’s new paint line and Galvalume production facility at its Columbus, Miss., USA, plant.
Quebec Considers Public Investment in Tata Steel Ore Project
22 January 2016 - The Canadian province of Quebec has signed an agreement in principle with Tata Steel to buy into the company’s direct shipping ore project in the Labrador Trough, reports La Presse Canadienne news service.
India Steps Back From POSCO Mill Project
22 January 2016 - The Indian government has set aside plans to establish a steel mill in partnership with South Korea’s POSCO, and will now focus on other projects with ArcelorMittal, reports The Times of India.
Angolan Steelmaker Cuts the Ribbon on New Mini-Mill
21 January 2016 - Angola’s Aceria de Angola has started producing steel at its new 500,000-tons-per-year mini-mill near the capital of Luanda.
Hyundai Steel Starts Up Caster, Bar Rolling Mills at New Plant
19 January 2016 - A bloom caster, a large-bar rolling mill, and a combination small-bar and wire rod mill have been started up at Hyundai Steel’s new special steel plant in South Korea.
Indonesian Steelmaker Orders Coil Equalizer
15 January 2016 - U.S.-based Delta Steel Technologies has won a contract to design and build one of its coil equalizers for Indonesia’s Gunung Steel Group, the company has announced.
AUMUND Wins Order for Conveyor at New DRI Plant in Algeria
15 January 2016 - Germany’s AUMUND Fördertechnik GmbH is building a 116-meter conveyor that will link a new hot direct reduced iron plant to a meltshop at the Tosyali Holding AS mill in Algeria.
French Rod Mill Upgrades Coil Handling System
15 January 2016 - French stainless steel wire rod producer Ugitech has awarded a final acceptance certificate on upgrades to the compacting and coil handling system in the company’s rod mill, according to the supplier, Primetals Technologies.
Primetals Wins Order for Two Continuous Casters
14 January 2016 - China’s Shandong Iron & Steel Group Rizhao Co. Ltd. has ordered two twin-strand continuous slab casters from Primetals Technologies, the company has announced.
Tenaris Upgrades EAF Injection System at Mexican Tube Mill
12 January 2016 - TenarisTamsa, Tenaris’ seamless tube mill in Mexico, has started up a new pneumatic carbon and lime injection system on its 160-ton electric arc furnace, the vendor on the project has announced.
Nucor Postpones Decision on US$3.4B Louisiana Steel Works
08 January 2016 - The future of Nucor Corp.’s proposed US$3.4-billion Louisiana steel works is in question after the company left US$130 million in state economic incentives sitting on the table, reports The (New Orleans) Times-Picayune newspaper.
Michigan Steel Processor Expanding Annealing Capabilties
08 January 2016 - U.S.-based steel processor HyCAL Corp. is expanding its annealing capacity, installing what it says is a first-of-its-kind continuous annealing (CA) line that uses hydrogen rather than water for strip cooling to produce ultra- and advanced high-strength steels.
Electrical Upgrades Underway at Gerdau Bar Mill
04 January 2016 - Italy’s Automazioni Industriali Capitanio (AIC) is installing a new rolling mill control system at Gerdau's Jackson, Tenn., USA bar plant, the company has announced.
SAIL, ArcelorMittal Hoping to Formally Establish New JV Later This Year
04 January 2016 - Executives at Steel Authority of India Ltd. (SAIL) and ArcelorMittal are looking to finalize a joint venture sometime this year for a new automotive steel mill in India, according to The (India) Economic Times newspaper.
Danieli, Tenova Bring New DRI Plant into Production
30 December 2015 - Ezz Steel’s new cold discharge DRI plant has been put into service and is exceeding production expectations by more than 10 percent, one of the plant's developers has announced.
AIC Upgrading Roughing Stands at German Rolling Mill
30 December 2015 - A German rolling mill will emerge from a holiday outage sporting new drives on four of its roughing stands, according to the vendor on the project.
