Industry Suppliers
The latest news on companies supplying equipment, products and/or services to the iron and steel industry.
Latest News
Danieli Caster First to Produce Extra-Large Beam Blank
22 May 2020 - A new, Danieli-built caster has reached a production milestone within months of a start-up – it produced what’s billed as the world’s largest beam blank and immediately topped out its capacity in the first cast.
Here’s Where Steel Industry Digitalization Can Have the Biggest Impact
21 May 2020 - New digital tools have the potential to greatly change steel production, but they perhaps have the most potential in two key areas, energy consumption and carbon reduction, according to Katja Windt, chief digital officer for SMS group.
SAIL Issues Final Acceptance on Plate Q&T Line
20 May 2020 - Steel Authority of India Ltd. (SAIL), the world’s 20th largest steelmaker, has issued the final acceptance certificate on a new roller hearth plate quench and temper line to CAN-ENG Furnaces International Ltd.
SMS group Signed for Coiler Improvements
19 May 2020 - German flat-rolled producer Salzgitter Flachstahl has contracted SMS group to upgrade the coilers at its hot strip mill, SMS group has said.
New Forging Plant Enters Service
18 May 2020 - Russia’s Zlatoust Metallurgical Plant (ZMZ) has commissioned a new Danieli-built forging facility, Danieli has announced.
Nucor Mill Commissions Water Treatment Plant
12 May 2020 - Commissioning of the Danieli-built water treatment plant at Nucor’s new Missouri rebar mill has been completed, Danieli has announced.
Voith, Moog Launch New JV
11 May 2020 - Electric and hydraulic drives manufacturers Voith Group and Moog Inc. are forming a joint venture that will focus on hydrostatic servo-hydraulics.
Big Parts, Big Plans: Equipment Deliveries Begin for Strip Mill Upgrade
07 May 2020 - NLMK Group’s La Louvière plant has begun receiving major components for its EUR150 million hot strip mill upgrade, the steelmaker reports.
Turkish Mill Signs PSIMetals for MES Upgrade
06 May 2020 - Turkish flat and long steel producer Metalurji A.Ş. has contracted PSIMetals to upgrade its manufacturing execution system (MES), the metals production management software developer announced.
Italian Steelmaker Installs Automated Tagging System
04 May 2020 - Italy’s Automazioni Industriali Capitanio (AIC) has wrapped up installation of a new bundle tagging system for rebar maker Ferriera Valsabbia.
Gerdau Certifies Danieli-Led Furnace Upgrade
30 April 2020 - Gerdau has signed off on an upgrade to a furnace at its Divinopolis plant in Brazil, reports Danieli, the project contractor.
POSCO Commissions New Coiler at Hot Strip Mill
28 April 2020 - POSCO’s Gwangyang works in South Korea recently wound the first coils on a newly installed coiler at its No. 4 hot strip mill.
FOERSTER Instruments Expands Portfolio
24 April 2020 - Non-destructive testing equipment maker FOERSTER Instruments Inc. is adding to its inspection offerings through a new representation agreement, the company has announced.
Primetals Technologies Gets the Nod for New Tandem Cold Mill
21 April 2020 - Primetals Technologies has bagged an order for a 6-stand tandem cold mill to be built in China’s Hebei province, the company announced Tuesday.
Tenova Announces Business Reorganization, Leadership Changes
20 April 2020 - Metals and mining equipment manufacturer Tenova is reorganizing, naming Roberto Pancaldi as the company’s chief executive officer and appointing former chief executive Andrea Lovato to the helm of its TAKRAF mining and bulk materials handling equipment business.
Nucor Chooses Danieli for Plate Mill Cranes
17 April 2020 - Nucor Corp. has contracted Danieli to supply the meltshop cranes for its Brandenburg, Ky., USA, plate mill.
Schenk Vision Lands Order for Inspection System for SDI Mill
16 April 2020 - Steel Dynamics Inc. has chosen Schenk Vision to equip production lines at its new Texas sheet mill with a surface inspection and surface analysis system.
Another Ally Joins COVID-19 Battle
14 April 2020 - Siemens AG, a key steel industry supplier, has offered up the services of its additive manufacturing network and 3D printers in the fight against the COVID-19 pandemic.
CELSA Taps Fives for Reheat Furnace Install
13 April 2020 - Spanish long products maker CELSA Group has ordered a new reheat furnace from Fives and contracted the OEM to modify a second, Fives has announced.
AIC Contracted for Caster Safety Improvements
09 April 2020 - Automation and robotics specialist Automazioni Industriali Capitanio (AIC) has been contracted to upgrade safety systems on a continuous caster in northern Italy.
Page 36 of 118
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
