Steel News

Turkish Producer Plans New Blast Furnace

17 September 2019 - The board at Turkey's Kardemir has OK'd plans to build a new blast furnace, a move that will lift the company's hot metal capacity by 1 million metric tons, the company has said.

Danieli to Supply New Quench and Self-Temper Line to Nucor Bar Mill

12 September 2019 - Danieli will be installing a new quenching and self-tempering system at Nucor Steel’s Marion, Ohio, USA, facility, the supplier reports.

US$1 Billion Steelmaking Facility Planned for the Philippines

10 September 2019 - Philippine steelmaker SteelAsia Manufacturing Corp. and China’s HBIS Group Co. Ltd. are partnering to build an integrated steelmaking facility in the Batangas province in the Philippines, according to a government newswire.

NLMK Iron Ore Project Enters Next Phase

10 September 2019 - NLMK Group’s Stoilensky iron ore division has moved to the third stage of construction on its new dewatering plant, the Russian steelmaker has said.

Autumn Will Be a Busy Season — For Maintenance Outages

09 September 2019 - Most of the biggest U.S. flat-rolled producers have maintenance outages planned for the remainder of the year, removing between 630,000 and 700,000 tons of capacity from service, reports commodities news and pricing serivce S&P Global Platts.

Primetals Technologies Automation Upgrades Receive Final Acceptance from Gerdau

05 September 2019 - Primetals Technologies has received the final acceptance certificates on level 1 and 2 systems upgrades at Gerdau's Ouro Branco mill in Brazil.

Tokyo Steel Chooses Danieli Automated Scrap Handling Solution

05 September 2019 - Tokyo Steel has contracted Danieli to automate classification of scrap at its Kyushu plant, Danieli has announced.

SMS Tapped to Revamp Salzgitter Caster

04 September 2019 - SMS group has been commissioned to revamp the No. 1 continuous caster at Salzgitter Flachstahl’s Salzgitter works in Germany.

Liberty Steel Sets European Investments

03 September 2019 - Sanjeev Gupta’s Liberty Steel plans to invest more than US$443 million over the next five years in its newly acquired European mills, Liberty Steel chief executive Jon Bolton tells Bloomberg news service.

Chinese Casters Re-Enter Production Following Improvements

03 September 2019 - China’s TISCO has completed upgrades to two thin-slab casters and has returned the machines to service, reports Danieli, the project contractor.

Job Candidates Line Up for Work at New Rebar Mill

28 August 2019 - Nucor Corp. is need of about 100 more people to fill out the payroll at its rebar mill in Sedalia, Mo., USA. But it shouldn’t have to look too hard – approximately 2,300 people have applied for any of the 250 available positons, according to regional economic development officials.

Vietnamese Steelmaker Starts Up Converter Shop at New Mill

27 August 2019 - Vietnam’s Hoa Phat Group has commissioned the first of four converters at its integrated greenfield mill near Da Nang, reports the supplier of the equipment.

Primetals Technologies to Supply Third Caster at Chinese Mill

27 August 2019 - Primetals Technologies has received an order for a continuous slab caster from China’s Baosteel Zhanjiang, the equipment supplier has said.

MORE Supplies 215th EAF Manipulator

27 August 2019 - Italian EAF equipment supplier MORE srl has reached a sales milestone, landing its 215th order for a one of its CATFIS automatic temperature and sampling manipulators.

JSW Steel USA Halts Construction on Baytown Expansion

22 August 2019 - JSW Steel USA has put their expansion plans for their Baytown, Texas., USA, steel works on hold, reports S&P Global Platts.

Anyang Steel Announces Investments for 1.66 Million Metric Ton Long Products Mill

21 August 2019 - China’s Anyang Iron & Steel outlined on Monday their plan to invest 5.8 billion yuan in a new long products facility with an annual capacity of 1.66 million metric tons per year, Shanghai Metal Market reports.

ANDRITZ to Upgrade Cold Strip Line at North American Stainless

20 August 2019 - North American Stainless utilize ANDRITZ technology to upgrade its No. 1 cold strip line at its Ghent, Ky., USA, facility, according to the supplier on the project.

BlueScope to Proceed With U.S. Expansion

19 August 2019 - Australian steel producer BlueScope Steel Ltd. is expanding their North Star business in Delta, Ohio, USA.

Stelco Awarded CA$50 Million From Canadian Government to Upgrade Plants

19 August 2019 - The investment is part of a project to modernize Stelco’s Hamilton and Lake Erie Works. The upgrades will include a new recycling facility and will bring about the creation of 75 new jobs.

New Electrode Manufacturing Tech Passes Performance Tests

13 August 2019 - A new type of extruder used to make graphite electrodes has passed its final acceptance tests, reports Danieli Breda, the equipment maker’s forging and extrusion unit.