.gif?width=220&height=200&mediaprotectionhash=b13da841472e6e7ed500ee35df2a350aaf53d75246118b33ea2095cc7e9a3fc4&ext=.gif)
American Iron and Steel Institute
AISI serves as the voice of the North American steel industry in the public policy arena and advances the case for steel in the marketplace as the preferred material of choice. AISI also plays a lead role in the development and application of new steels and steelmaking technology. AISI is comprised of 23 member companies, including integrated and electric furnace steelmakers, and approximately 125 associate members who are suppliers to or customers of the steel industry. AISI's member companies represent over three quarters of both U.S. and North American steel capacity.
Latest News
U.S. Senate Steel Caucus Hosts Capitol Hill Reception
20 September 2013 - On 12 September, Senate Steel Caucus Co-Chairs Senators Jay Rockefeller (D-WV) and Jeff Sessions (R-AL), and Vice Chairs Senators Sherrod Brown (D-OH) and Pat Toomey (R-PA), hosted an informal meet-and-greet reception on Capitol Hill for current and perspective Senate Steel Caucus Members, as well as representatives from the steel industry.
July U.S. Steel Shipments Up 6% M-o-M, Down 4% Y-o-Y
16 September 2013 - The American Iron and Steel Institute (AISI) reported that for the month of July 2013, U.S. steel mills shipped 8,274,511 tons, a 6.0% increase from the 7,806,319 tons shipped in the previous month, June 2013, and a 4.6% increase from the 7,910,486 tons shipped in July 2012.
Key Cold-Formed Steel Framing Associations to Form Coalition
16 September 2013 - Four key trade associations representing the steel stud industry have joined together to promote the use of cold-formed steel framing in construction.
AISI: U.S. Steel Import Permits Up 7% in August
04 September 2013 - The American Iron and Steel Institute (AISI) reported that steel import permit applications for the month of August total 2,686,000 tons: a 7% increase from the 2,508,000 permit tons recorded in July and 9% increase from the July preliminary imports total of 2,475,000 tons.
Preliminary U.S. Steel Imports Increase 1% in July
26 August 2013 - Based on preliminary Census Bureau data, the American Iron and Steel Institute (AISI) reported that the U.S. imported a total of 2,475,000 tons of steel in July 2013, including 1,956,000 tons of finished steel (up 0.6% and down 0.9%, respectively, vs. June final data).
AISI: Preliminary U.S. Steel Imports Increase 1% in July
26 August 2013 - Based on preliminary Census Bureau data, the American Iron and Steel Institute (AISI) reported that the U.S. imported a total of 2,475,000 tons of steel in July, including 1,956,000 tons of finished steel (up 0.6% and 0.9%, respectively, vs. June final data).
June Steel Shipments Down 3% from May in U.S.
21 August 2013 - The American Iron and Steel Institute (AISI) reported that for the month of June 2013, U.S. steel mills shipped 7,806,319 tons, a 3% decrease from the 8,047,245 tons shipped in the previous month, May 2013, and a 2.6% decrease from the 8,016,834 tons shipped in June 2012.
AISI Applauds ITC Imports Vote in OCTG Trade Case
20 August 2013 - The American Iron and Steel Institute (AISI) applauded the affirmative preliminary injury vote by the International Trade Commission, which allows the AD and CD investigations on OCTG from India, Philippines, Saudi Arabia, South Korea, Taiwan, Thailand, Turkey, Ukraine and Vietnam to move forward.
AISI Comments on U. S. Steel Leadership Changes
19 August 2013 - Commenting on John Surma's retirement from U. S. Steel, the American Iron and Steel Institute said the steel industry in general, and AISI in particular, will forever be indebted to John Surma for his passion, wisdom, commitment and leadership over the past decade as CEO of U.S. Steel.
Final Seismic Test for Cold-Formed Steel Structure Set for 16 August 2013
14 August 2013 - A team of leading cold-formed steel design researchers this summer has been conducting a series of tests as part of the final phase of a three-year National Science Foundation (NSF)-funded research project to increase the seismic safety of buildings that use lightweight cold-formed steel for their primary beams and columns.
New Study Confirms Lightweight Steel Wheels Equivalent in Mass to Aluminum at 40% Cost Savings
09 August 2013 - The Steel Market Development Institute's Wheels Task Force recently unveiled the results of its latest lightweight steel wheel project which developed a stylish new steel wheel design solution that is equivalent in mass to a comparable aluminum wheel, but at a 40% cost saving.
AISI: U.S. Steel Import Permits Down 6% in July
07 August 2013 - Based on the Commerce Department’s most recent Steel Import Monitoring and Analysis (SIMA) data, the American Iron and Steel Institute (AISI) reported that steel import permit applications for the month of July total 2,476,000 tons.
New Life Cycle Assessment Study Shows Replacing Wood Utility Poles with Steel Lowers Key Environmental Impacts
07 August 2013 - A detailed life cycle assessment (LCA) study commissioned by the Steel Market Development Institute, found that when comparing overall environmental performance, galvanized steel utility poles outperform wood poles in key environmental measures.
AISI Lauds Passage of Bridge Amendment
26 July 2013 - The American Iron and Steel Institute (AISI) applauded the Senate passage of an amendment to ensure that bridges most in need of repair are fixed ahead of any others.
U.S. Preliminary Steel Imports Drop 14% in June
24 July 2013 - Based on preliminary Census Bureau data, the American Iron and Steel Institute (AISI) reported that the U.S. imported a total of 2,442,000 tons of steel in June, including 1,956,000 tons of finished steel (down 14% and 9%, respectively, vs. May final data).
U.S. Steel Executives Visit Capitol Hill, Discuss Manufacturing Issues
16 July 2013 - CEOs and senior executives from the U.S. steel industry were in Washington, D.C. today meeting with members of Congress and administration officials to press the case for manufacturing and, specifically, the domestic steel industry.
May U.S. Steel Shipments Up From April, Down from Prior Year
16 July 2013 - The American Iron and Steel Institute (AISI) reported that for the month of May 2013, U.S. steel mills shipped 8,047,245 tons, a 0.9% increase from the 7,978,531 tons shipped in the previous month, April 2013, and a 4.6% decrease from the 8,436,831 tons shipped in May 2012.
SMDI Says Obama Climate Action Plan Vehicle Strategy is Flawed
10 July 2013 - The Steel Market Development Institute (SMDI) says one of the three pillars of the Obama Administration's Climate Action Plan — to cut carbon emissions in America by implementing strict fuel economy regulations for American vehicles — is a sound objective, but seriously flawed.
U.S. Import Permits Down 10% in June
03 July 2013 - The American Iron and Steel Institute reported that steel import permit applications for the month of June total 2,565,000 tons — this was a 10% decrease from the 2,853,000 permit tons recorded in May.
AISI Supports OCTG Imports Investigations Filed Today
02 July 2013 - The trade association representing North American steel producers today lent its support to petitions filed today with the Department of Commerce (DOC) and the International Trade Commissions (ITC) seeking antidumping relief on certain oil country tubular goods (OCTG) from India, Philippines, Saudi Arabia, South Korea, Taiwan, Thailand, Turkey, Ukraine and Vietnam. Petitioners are also seeking countervailing duties on certain OCTG from India and Turkey.
