.gif?width=220&height=200&mediaprotectionhash=b13da841472e6e7ed500ee35df2a350aaf53d75246118b33ea2095cc7e9a3fc4&ext=.gif)
Tosyali Toyo Contracts Danieli to Supply New Hot Dip Galvanizing Line
07/17/2015 - In May 2015, Tosyali Toyo Çelik Anonim Şirketi placed a contract with Danieli to supply a new Hot Dip Galvanizing Line dedicated to the production of HSS material to be installed in their facility in Osmaniye.
The new Hot Dip Galvanizing Line is designed to produce up to 0.45 Mtpy of finished coils.
Designed to serve the high quality paint application and automotive sector, it is equipped with a double entry end with electrical mash-seam welder, a cleaning section and an entry vertical accumulator.
The Annealing Furnace, supplied by Danieli Centro Combustion, is equipped with free flame section, “double-P” self-recuperative radiant tubes section, and fast jet cooling section able to process HSS material.
The final zinc thickness will be tightly controlled by the innovative X-Jet Danieli Kohler wiping system. It will increase the quality of the zinc coating process guaranteeing extraordinary uniformity along the strip width and allowing the production of thin GI coating down to 40 g/m2 each side at 180 m/min.
The strip will be then skin-passed for final roughness control, tension leveled and passivated.
At the exit of the line the strip will be inspected through an in-line inspection station and then rewound on exit recoiler.
The order also includes the complete Line electrical and automation equipment (by Danieli Automation) that guarantees the “one hand” responsibility and consequently the full control of the technological process.
The installation is planned for the end of November 2016.
Designed to serve the high quality paint application and automotive sector, it is equipped with a double entry end with electrical mash-seam welder, a cleaning section and an entry vertical accumulator.
The Annealing Furnace, supplied by Danieli Centro Combustion, is equipped with free flame section, “double-P” self-recuperative radiant tubes section, and fast jet cooling section able to process HSS material.
The final zinc thickness will be tightly controlled by the innovative X-Jet Danieli Kohler wiping system. It will increase the quality of the zinc coating process guaranteeing extraordinary uniformity along the strip width and allowing the production of thin GI coating down to 40 g/m2 each side at 180 m/min.
The strip will be then skin-passed for final roughness control, tension leveled and passivated.
At the exit of the line the strip will be inspected through an in-line inspection station and then rewound on exit recoiler.
The order also includes the complete Line electrical and automation equipment (by Danieli Automation) that guarantees the “one hand” responsibility and consequently the full control of the technological process.
The installation is planned for the end of November 2016.
