New Wire Rope Scanning Technology from SCX Improves Safety, Reduces Downtime
01/01/2015 - The chance of unplanned downtime and accidents resulting from defective cranes used for metal manufacturing could be reduced by new wire rope scanning technology from SCX.
Metal manufacturing requires a high level of caution and operational precision often under tough and volatile conditions. A lapse in concentration or faulty crane equipment could lead to operational downtime, injuries or far worse.
According to a survey conducted by downtime expert Don Fitchett, founder of the Business Industrial Network, the average hourly downtime rate per year within the metal industry is 636 hours and recent GB estimates show that over the past five years, second to food manufacturing, metal fabrication, had the most fatal injuries.
Ray Fletcher, director of Street CraneXpress (SCX) said: “It is crucial that condition monitoring is performed in order to improve safety and avoid costly downtime so that these alarming figures will not be a future concern.”
The new Wire Rope NDT (Non-Destructive Testing) service from SCX allows engineers to perform a full cross-section inspection of a crane’s wire ropes in order to identify a problem in time to take preventative action - thus minimizing the chance of downtime and injuries.
Until now it has been impossible to see inside a crane’s wire ropes without cutting through and permanently destroying them. However, the new Wire Rope NDT service uses magnetic flux technology which enables engineers to see further than the human eye — throughout the entire length of the crane’s wire ropes to pre-empt any potential defects.
“We have already worked with several manufacturers to prevent a potential problem after NDT scans revealed unexpected damage,” said Fletcher. “As well as helping to reduce the risk of failure and preventing downtime, use of the system ensures that cranes are running in prime condition and, above all, safely.”
The scanning technology is part of SCX’s Advanced Crane Diagnostics — the new name for its condition monitoring services, which analyze the crane using thermal imaging, vibration monitoring and gearbox oil analysis.
“Each Advanced Crane Diagnostics package can incorporate any or all of these techniques and, most importantly, it is tailor-made to individual crane criticality,” said Fletcher.
He emphasized that early diagnosis is especially important in the metal manufacturing industry due to fast crane deterioration as a result of continuous usage. “Advanced Crane Diagnostics is a small outlay which provides huge payback, through savings on downtime and repair costs,” he added.
Pictured above: SCX engineer using the new wire rope scanning technology.
According to a survey conducted by downtime expert Don Fitchett, founder of the Business Industrial Network, the average hourly downtime rate per year within the metal industry is 636 hours and recent GB estimates show that over the past five years, second to food manufacturing, metal fabrication, had the most fatal injuries.
Ray Fletcher, director of Street CraneXpress (SCX) said: “It is crucial that condition monitoring is performed in order to improve safety and avoid costly downtime so that these alarming figures will not be a future concern.”
The new Wire Rope NDT (Non-Destructive Testing) service from SCX allows engineers to perform a full cross-section inspection of a crane’s wire ropes in order to identify a problem in time to take preventative action - thus minimizing the chance of downtime and injuries.
Until now it has been impossible to see inside a crane’s wire ropes without cutting through and permanently destroying them. However, the new Wire Rope NDT service uses magnetic flux technology which enables engineers to see further than the human eye — throughout the entire length of the crane’s wire ropes to pre-empt any potential defects.
“We have already worked with several manufacturers to prevent a potential problem after NDT scans revealed unexpected damage,” said Fletcher. “As well as helping to reduce the risk of failure and preventing downtime, use of the system ensures that cranes are running in prime condition and, above all, safely.”
The scanning technology is part of SCX’s Advanced Crane Diagnostics — the new name for its condition monitoring services, which analyze the crane using thermal imaging, vibration monitoring and gearbox oil analysis.
“Each Advanced Crane Diagnostics package can incorporate any or all of these techniques and, most importantly, it is tailor-made to individual crane criticality,” said Fletcher.
He emphasized that early diagnosis is especially important in the metal manufacturing industry due to fast crane deterioration as a result of continuous usage. “Advanced Crane Diagnostics is a small outlay which provides huge payback, through savings on downtime and repair costs,” he added.
Pictured above: SCX engineer using the new wire rope scanning technology.
